Get a quote Request call back
Level 2 AC & Fast DC Charging · Victoria

Smart EV Charger Installation

Charge your vehicle with clean, self-generated energy. We provide premium EV chargers fully integrated with your solar and battery systems, designed and installed by our in-house team.

Book Site AssessmentSpeak to an Expert

No subcontracting. We handle switchboard assessment, dynamic load balancing setup, and compliance certification in-house.

Fast & Immediate Booking

Unlike solar grid connections, EV chargers do not require power distributor approvals. We can install yours immediately.

  • No Grid Pre-Approval Required
  • Surplus Solar Diversion Ready
  • Dynamic Load Balancing Safety
  • In-House A-Grade Electricians
Premium Offerings

Smart Chargers We Install

We design and install Victoria's three leading EV charger platforms. From solar-diversion systems to rapid DC charging, explore our product offerings.

myenergi Zappi smart solar EV charger
Eco-Smart Solar Leader

myenergi Zappi (1P / 3P)

The Zappi is the pioneer of solar-diversion charging. It constantly monitors your household solar generation and household consumption, directing only surplus green energy into your EV so you charge for free.

  • ECO & ECO+ modes charge using 100% surplus solar
  • Single Phase (7kW) and Three Phase (22kW) options
  • Built-in PEN fault protection (no earth rod required)
  • Dynamic load balancing prevents home fuse overload
  • Pin-code lock security and robust myenergi App control
GoodWe smart EV charger
Sleek System Integration

GoodWe Smart Charger (1P / 3P)

Perfect for homes with existing GoodWe solar or battery systems. GoodWe's smart AC charger integrates directly under your SEMS Portal app, allowing you to manage panels, batteries, and car charging in one unified dashboard.

  • Seamless integration with GoodWe solar & batteries
  • Single Phase (7kW) and Three Phase (22kW) standard AC
  • Unified monitoring under the GoodWe SEMS Portal
  • Smart scheduling to automatically charge on off-peak rates
  • IP65 dust & waterproof protection for outdoor installs
Sigenergy Sigen EV AC Wallbox and DC charger
Next-Gen Fast DC charging

Sigenergy Sigen EV AC (1P / 3P) & DC Charger

Sigenergy offers standard AC wallboxes and a revolutionary Fast DC Charger module. The Sigen DC charger integrates directly into SigenStor stacks, charging your car straight from the battery/solar DC bus to bypass conversion losses.

  • AC Wallbox (7.3kW / 22kW) & SigenStor DC Modules (12.5kW / 25kW)
  • Fast DC Charger draws power directly from DC battery stack
  • Eliminates AC-to-DC conversion losses for maximum efficiency
  • Full smart-grid integration and VPP ready
  • Centralized control via the mySigen App with 10-year warranty

No Grid Pre-Approvals Required

When you add solar panels or retrofitted home battery systems in Victoria, DNSP distributors require grid pre-approvals that can take up to 4 weeks.

EV chargers are load appliances (similar to adding an electric hot water service or air conditioner). Because of this, **no pre-approvals are required** from energy networks. We can inspect, design, and install your charger immediately.

  • Book installation within days
  • Zero paperwork delays from DNSPs
  • Compliant with Victorian electrical safety rules

Instant Project Kickoff

Skip the DNSP queue. Get your Level 2 EV charging setup installed immediately and start driving on clean power.

Comparison Chart

Technical Specifications

Compare the core differences in charging power, solar features, dynamic load protections, and manufacturer warranties across our primary EV charging platforms.

Featuremyenergi ZappiGoodWe SmartSigenergy Sigen EV
Power Output Options7kW (1P) / 22kW (3P)7kW (1P) / 22kW (3P)AC: 7.3kW / 22kW | DC: 12.5kW / 25kW
Direct DC Fast ChargingNo (AC Only)No (AC Only)Yes (via SigenStor DC EV Module)
Solar Surplus MatchingYes (ECO & ECO+ modes)Yes (via SEMS portal config)Yes (mySigen app energy management)
Ecosystem IntegrationStandalone or myenergi eco-productsGoodWe hybrid inverters & storageSigenStor modular home battery stack
Safety ProtectionsDynamic load balancing, PEN faultDynamic load balancing, RCD protectionDynamic load balancing, RCD & PEN fault
Standard Warranty3 Years2 Years (upgradable)Up to 10 Years

Our Process

How we inspect, design, install, and certify your EV charger. Sized for safety, engineered for solar, and installed by in-house A-Grade electricians.

Swipe the cards below to explore each phase

Phase One · Switchboard & Capacity Assessment

Understanding your home's electrical capabilities.

Before choosing a charger, we must assess your property's electrical foundation. Our A-Grade electricians inspect your existing main switchboard to identify if your home has a single-phase or three-phase power supply.

We check the capacity of your main service fuse, verify if there is physical space in your panel for a new dedicated circuit breaker, and inspect your home's earthing systems. This assessment ensures your EV charger operates at maximum speed without overloading your home.

Phase 1 of 6
Questions & Answers

Frequently Asked Questions

Do I need three-phase power to install an EV charger at home?

No. Most homes in Victoria have a standard single-phase connection, which supports a 7kW (Level 2) charger. A 7kW charger adds about 40–45km of range per hour, meaning a full charge takes 6–8 hours—perfect for overnight charging. If your home has a three-phase connection, you can install a 22kW charger, which can charge a compatible vehicle up to three times faster.

What is solar-diversion charging and how does it work?

Solar diversion (supported by Zappi and Sigenergy) dynamically adjusts the charger's output to match only the excess energy generated by your solar panels in real-time. Instead of exporting surplus power to the grid for a small credit, the energy goes directly into your EV battery, letting you drive on 100% free, zero-emissions solar power.

Is grid pre-approval required for installing an EV charger in Victoria?

No pre-approvals are required. Unlike solar grid-connections or battery retrofits that require waiting weeks for permission from your network distributor (DNSP), EV chargers are load devices (similar to installing an induction cooktop or a large air conditioner). We can book and complete your installation immediately.

Sigenergy vs Zappi vs GoodWe — which EV charger fits my setup?

If you want a dedicated solar-matching charger with robust off-grid capabilities, the myenergi Zappi is the gold standard. For homeowners with GoodWe solar or battery systems, the GoodWe Smart Charger integrates into your existing SEMS Portal app. For cutting-edge charging, Sigenergy's Sigen EV AC Charger integrates with SigenStor, while their Fast DC Charger module draws power directly from the DC battery bus, eliminating AC conversion losses.

What is dynamic load balancing and do I need it?

Dynamic load balancing is a safety feature that monitors your home's total electrical demand. If you turn on multiple high-load appliances (like an oven, clothes dryer, and air conditioning) while your car is charging, the system automatically dials back the EV charger's speed to prevent overloading your main fuse. Once household usage drops, the charger ramps back up to maximum speed.

Ready to charge on clean energy?

Book a switchboard suitability assessment and receive a compliant, fixed-price EV charger installation quote.

Book Assessment1300 983 247